Philips AZT9240 - Manual (Page 9)

CD PLAY
12
This CD player can play all kinds of Audio Discs such
as CD-Recordables and CD-Rewritables. Do not try to
play a CD-ROM, CDi, VCD, DVD or computer CD.
1 Push the OPEN 2 slider.
y The lid opens.
2 Insert an audio CD, printed side up, by pressing
gently on the CD centre so that it fits onto the hub.
Close the lid by pressing it down
.
3 Press 2; to switch the player on and start playback.
y The current track number and elapsed playing
time are displayed.
• You can pause playback by pressing 2;.
y The time where playback was paused is flashing.
• Continue playback by pressing 2; again.
4 Press 9 to stop playback.
y The total number of tracks and the total playing
time of the CD are displayed.
5 Press 9 again to switch the player off.
• To remove the CD, hold it by its edge and press the
hub gently while lifting the CD.
Note: If there is no activity, the set will automatically
switch off after a while to save energy.
0
ESP
DIGIT AL DBB
·MODE
0
OPEN
VOL.
Playing a CD
English
AZT9240/01 eng 23/2/01 17:28 Page 12