Polaris Sportsman 9921335 - Manual (Page 103)

103
MAINTENANCE
Battery
Battery Removal
1. Place the transmission in
gear.
2. Lock the parking brake.
3. Open the front cover.
4. Disconnect the battery
hold-down strap.
5. On conventional batteries,
remove the battery vent
tube.
6. Disconnect the black
(negative) battery cable
first.
7. Disconnect the red
(positive) battery cable
last.
8. Lift the battery out of the ATV. Be careful not to tip a conventional
battery sideways, which could spill electrolyte.
WARNING
Improperly connecting or disconnecting battery cables can result in an explo-
sion and cause serious injury or death. When removing the battery, always
disconnect the negative (black) cable first. When reinstalling the battery,
always connect the negative (black) cable last.
CAUTION
If electrolyte spills, immediately wash it off with a solution of one tablespoon
baking soda and one cup water to prevent damage to the vehicle.