Patton electronic RocketLink 3202 - Manual (Page 37)

Basic Configuration Options 37
Model 3202 Getting Started Guide 4 • Web configuration
5. Click Next to commit your changes and continue to the LAN page (see “LAN” on page 37).
Figure 10. Basic DHCP setup
LAN
To configure LAN settings through the WMI:
1. Click on Basic from the main menu. Set up the Operation Mode and MGMT port, then click Next. Set
up the DHCP Server, then click Next to reach the LAN page.
Figure 11. LAN setup page
2. Choose an option for the LAN Type. If you select Disable or Dynamic IP, click Next at the bottom of the
screen to save your changes. If you select Static IP, you can enter information for IP, Subnet Mask, Gate-
way and DNS Server's IP.