Planar C3i/EX - Manual (Page 50)

40 | Dome Display
Connector Ports
The video signal connector is a standard DVI connector, driving data
to the display.
The Dome E2 display uses a 4-pin DIN connector. The power input is
12V ±5% (80 W).
The Dome C3i, Dome E3, Dome E3c, and Dome E5 displays use
a 8-pin DIN connector. The power input is 12V ±5% (120 W).
Details of DIN connectors
4-pin connector on
Dome E2 display
8-pin connector on
Dome C3i, Dome E3,
Dome E3c, and
Dome E5 displays
Power port on Dome EX displays Power port on Dome C3i display
VCC 1 2 GND
GND 3 4 VCC
VCC 7
VCC 8
1 GND
VCC 5 3 GND
2 GND VCC 6
4 GND