Philips EXPANIUM 4000AZ - Manual (Page 11)

Adjusting the Sound
Volume
Turn the SOUND CONTROL
CENTRE/ VOLUME control clockwise
to increase or anti-clockwise to decrease
volume on the set (or press VOLUME 3
or 4 on the remote control).
➜ Display shows the volume level
indication, and a number from
0-32.
Bass & treble frequencies
To adjust the bass and treble frequency
levels, on the set press the BASS/
TREBLE button once or more until the
desired option is displayed. While the
BASS/ TREBLE option is shown, turn the
SOUND CONTROL CENTRE/
VOLUME control to increase or decrease
(-5 to + 5 steps maximum) the desired
tone.
ULTRABASS
This is another bass sound option. Press
ULTRABASS once or more to select
Ultrabass on or off (
).
➜ When activated, the ULTRABASS
indicator lights up and the display shows
.
Notes:To prevent sound interference the bass
control options operate exclusively.You cannot
combine the bass from BASS/TREBLE with
ULTRABASS.
– The display shows
or
to remind you if you attempt to use both bass
settings.
You can also press BASS on the remote
control to select Ultrabass on/off.
Mute
• Press MUTE on the remote control to
interrupt sound reproduction instantly.
➜ Playback continues without sound and
display shows blinking when
activated.
• To reactivate sound reproduction or cancel
MUTE you can:
– press MUTE again;
– adjust the volume controls;
– change source;
– switch the set off.
Adjusting the sound
11
English
ULTRABASS
ULTRABASS
B
CD
VOLUME
REPEAT
MUTE
BASS
SHUFFLE
3
4
XP AZ 4000/17 18-09-2001 15:04 Pagina 11