Panasonic SC-HT990 - Manual (Page 32)

RQ
T
8
7
2
2
32
Usi
ng the
radi
o
Using the radio
Up to 15 stations can be set in each band, FM and AM.
When a stereo FM broadcast is being
received, “ST” lights in the display.
∫ If noise is excessive
When “FM” is selected
Press and hold [—FM MODE] on the main
unit to display “MONO”.
Press and hold [—FM MODE] again to cancel the
mode.
≥ The mode is also canceled when you change the
frequency.
When “AM” is selected
Press [FUNCTIONS] on the remote control.
Each time you press the button: BP 2
()BP 1
∫ Presetting the channel
Up to 15 stations can be set in each band, FM and AM.
1 While listening to the radio broadcast
Press [ENTER].
2 While the frequency and “PGM” are flashing on
the display
Press the numbered buttons to select a
channel.
≥ To select a 2-digit number
e.g. To select 12:
[ S10] ➜ [1] ➜ [2]
Alternatively, press [ X, W], and then press
[ENTER].
The station occupying a channel is erased if another
station is preset to that channel.
Presetting stations automatically
1 Press [SELECTOR] to select “FM” or “AM”.
2 Press [-TUNE MODE] to select “MANUAL”.
Each time you press the button:
MANUAL
()PRESET
3 Press [ X TUNING W] to tune to the lowest
frequency (FM: 87.50, AM: 522).
4 Press and hold [MEMORY].
Release the button when “FM AUTO” or “AM AUTO”
is displayed.
The tuner presets all the stations it can receive into
the channels in ascending order.
≥ “SET OK” is displayed when the stations are set,
and the radio tunes to the last preset station.
≥ “ERROR” is displayed when automatic presetting is
unsuccessful. Preset the channels manually
(
➜ right).
MEMORY
SELECTOR
TUNING
-TUNE MODE / -FM MODE
ENTER
FUNCTIONS
TUNER/BAND
Numbered
buttons
The illustration shows SC-HT540.
M ain unit only
Selecting the preset channels
1 Press [TUNER/BAND] to select “FM” or “AM”.
2 Press the numbered buttons to select the
channel.
≥ To select a 2-digit number
e.g. 12: [ S10] ➜ [1] ➜ [2]
Alternatively, press [ X, W].
Manual tuning
1 Press [SELECTOR] to select “FM” or “AM”.
2 Press [-TUNE MODE] to select “MANUAL”.
3 Press [ X TUNING W] to select the frequency.
≥ To start automatic tuning, press and hold
[ X TUNING W] until the frequency starts scrolling.
Tuning stops when a station is found.
DISC SFC TG D.MIX MONO SLP
DE
AC
PRG
S
A
ST
H.BASS
SRD
PGM
HDCD
E.
1
W
MONO ST
H.BASS
SRD
PGM
HDCD
E.
1
W
M ain unit only
DISC SFC TG D.MIX MONO SLP
HT540En.book Page 32 Monday, February 27, 2006 8:15 PM