Planet Technology Internet Camera ICA-110W - Manual (Page 84)

84
Q: What network cabling is required for the ICA-110/ICA-
110W?
A: The ICA-110/ICA-110W uses Category 5 UTP cable allowing
10 Base-T and 100 Base-T networking.
Q: Can the ICA-110/ICA-110W be setup as a PC-cam on the
computer?
A: No, the ICA-110/ICA-110W is an Internet Camera used only
on Ethernet and Fast Ethernet network and supported by wireless
transmission.
Q: Can the ICA-110/ICA-110W be connected on the network
if it consists of only private IP addresses?
A: The ICA-110/ICA-110W can be connected to LAN with
private IP addresses. However, user can only access the Internet
Camera in the LAN, not WAN.
Q: Can the ICA-110/ICA-110W be installed and work if a
firewall exists on the network?
A: If a firewall exists on the network, port 80 is open for ordinary
data communication. However, since the ICA-110/ICA-110W
transmits image data, the default port 8481 is also required.
Therefore, it is necessary to open port 8481 of the network for
remote users to access the ICA-110/ICA-110W.