Panasonic SL-CT521C - Manual (Page 6)

6 RQT7814
MODE button
Each time you press and hold [EQ]
∫ Specifying the AB segment
Press [MEMORY] at the start point (A) and once more at the end point (B).
≥ Stop or skip ( ➪page 5) to cancel.
≥ If you do not specify point B this will automatically be set as the end of the
disc. Repeat begins when this point is reached. You can specify point B
again by pressing [MEMORY].
` ` RND RND A 1
` B `
3d-1 3d-2 S-XBS S-XBSr TRAIN
(3D) (3D)
Each time you press [EQ], while displayed
Boosts
the bass
Reduces sound
leaks and
listening fatigue
Each time you press [MODE]
One track
repeat
All track
repeat
Random Random
repeat
No display (canceled)
≥ “3d-1” or “3d-2” disappears after being selected and “3D” appears
instead.
≥ The effect may differ with different kinds of music.
≥ Depending on the recording conditions, sound may be interrupted
when switching between EQ settings.
≥ If you select 3d-1 or 3d-2 then try playing a disc that contains both
CD-ROM format and CD-DA format tracks, there will be a brief noise
when the disc changes from playing the CD-ROM format track to the
CD-DA format one.
No display (canceled)
Enhanced
S-XBS
During play
While paused
or
Tone off Tone on
bP on bP oFF
AB repeat ( ➪below)
≥ You cannot select “RND” and “A`B” while playing MP3.
Sound
field of
3D
Enhanced
3d-1
Each time you press and hold [MODE]
No display
(canceled)
Album mode
EQ MODE MEMORY
3d-1
EQ button
EQ MODE MEMORY
Changing the sound quality Play modes
Changing the remote control operation tone
Playing only the tracks in a selected album (Album mode)
≥ To select another album ( ➪page 5, Album skip)
≥ You cannot turn album mode on during program play ( ➪below).
MP3
Using the Remote Control
While stopped, each time you press and hold [MEMORY]
≥ You cannot change the memory time for MP3. It’s a maximum of
100 seconds for MP3 recorded at 128 kbps.
1 /∫
MEMORY Confirm
1 /∫
Press during play.
(“M” disappears.)
Press during play.
Press after all desired
tracks have been
programmed.
While stopped, use [:] or [9] to select the track,
then press [MEMORY].
Track number Sequence number
Repeat to program up to 20 tracks.
Sequence
number
Track number Album number
POS1 POS2
You can regenerate signal frequency lost during compression,
restoring the sound to near pre-compression form.
While stopped, each time you press and hold [MEMORY]
RMTR
Sound enhanced
No display
Conserves battery life
EQ MODE MEMORY
POS1 MEMORY button
3 -- 01
M
Will appear after
[MEMORY] is pressed
3 1
-- 01
M
ALBUM M
The anti-skip function (ANTI-SKIP SYSTEM) reduces or eliminates
skipping caused by vibration. You can change the anti-skip memory
time.
Program desired tracks only (Program play) Changing the anti-skip mode
Enjoying more natural sound (Digital Re-master)
MP3
CD-DA
MP3
Sound enhanced mode,
10-second anti-skip memory
Anti-skip enhanced mode,
45-second anti-skip memory
CD-DA
Cancel
Play