Panasonic DVD-F61 - Manual (Page 17)

Ad
v
a
nc
ed ope
rations
RQT67
2
6
17
Audio Menu Picture Menu
∫ User mode
Press [ 1 ] while “U1” or “U2” is highlighted and then press [ 3 , 4 ] to
select “1” or “2”.
U1: User mode 1
U2: User mode 2
(Video output mode ➜ above)
Indicates how far you have played through an item.
Changing the time display [RAM] [DVD-A] [DVD-V] [VCD] [CD]
Press [ 3 , 4 ] to show the elapsed play time or remaining time for the
program, play list, track or title (or chapter during program and random
play).
Elapsed play time
[VCD] (SVCD only) [WMA] [MP3]
For display only, cannot be changed.
∫ Changing play speed [DVD-A] (Moving picture part) [DVD-V]
(Dolby Digital only)
Press [ 2 ] (slower) or [ 1 ] (faster).
There are five speeds:
a 0.8 ,. a 0.9 ,. a 1.0 (normal speed) ,. a 1.2 ,. a 1.4
≥ After you change the speed:
–Output is in stereo,
–Advanced surround does not work,
–Digital output switches to PCM.
≥ Sound is stereo as long as “ k 1.0” is orange.
To return to normal play
Press [
1 ] (PLAY).
Advanced surround (VSS)
[RAM] [DVD-V] [VCD] (2-channel or greater)
Enjoy a surround-like effect when using 2 front speakers
(SP) or headphones (HP) (connect the unit to equipment
that has a headphone jack). The effect broadens when
playing discs with surround effects and sound seems to
come from speakers on either side of you.
≥ VSS mode: SP () HP
≥ SP/HP level
1: Natural effect
2: Emphasized effect
OFF: Cancel (Factory preset)
To change SP/HP level: [ 1 ] ➜ [ 3 , 4 ]
Optimum seating position
<When using the
television’s
speakers>
Distance A=
Television’s width
≥ This does not work or has less effect with some discs.
≥ Turn off if it causes distortion.
≥ Do not use in combination with surround effects on other
equipment.
Double re-master ( ➜ page 13)
Dialogue enhancer
[DVD-V]
(Dolby Digital, DTS, 3-channel or over, where the
dialogue is recorded in the center channel)
This makes the dialogue in movies easier to hear.
ON (—) OFF (Factory preset)
≥ This does not work or has less effect with some
discs.
A
SP 1
A Speaker Speaker
3 to 4 times
distance A
Seating position
D
Picture mode
N: Normal mode
U1/U2: User mode ( ➜ below)
Video output mode
480I:
Interlace video
480P: Progressive video
(
¢ : Progressive output not possible with PAL signals)
≥ You can change the video output mode only when
“Progressive Out (Component)” in the SETUP menu is set
to “Enable” (
➜ page 18).
≥ When progressive output is on, closed captions will not be
displayed.
Transfer mode
Select the method of conversion for progressive output to
suit the type of material being played. (
➜ back cover,
Glossary—Film and video)
Auto1 (normal): For viewing film material
Auto2:
For viewing film material (the same as Auto1, but able
to convert 30-frame-per-second progressive video)
Video: For video material
Contrast ( j 7 to i 7)
Adjusts the contrast between light and dark parts of the
picture.
Brightness (0 to i 15)
Adjusts the picture brightness.
Sharpness ( j 7 to i 7)
Adjusts the sharpness of the edges of the horizontal lines.
Color ( j 7 to i 7)
Adjusts the shade of the picture’s color.
Gamma (0 to i 5)
Adjusts the brightness of dark parts of the picture.
C1 (Cinema1): Mellows images and
enhances detail in dark
scenes
C2 (Cinema2): Sharpens images and
enhances detail in dark
scenes
C
Progress indicator
e.g. [DVD-V] Current position
Condition – play, pause, or slow/search