Paradyne COMSPHERE 6700 SERIES - Manual (Page 42)

Custom Network Interface Settings
5-11 Issue 2 December 1996
Specifying Dial Settings
Use Dial... to specify dial parameters for SLIP interfaces.
.
Procedure
1. Choose Settings... from the Network menu. The
Custom window appears, as shown in Figure 5-1.
2. Choose Setup from the Custom window menu bar.
3. Choose Dial... from the Setup menu. The Dial Settings
dialog box appears, as shown in Figure 5-7.
Table 5-5 describes the fields on the Dial Settings
dialog box.
Figure 5-7. Dial Settings Dialog Box
4. Enter the appropriate dial settings.
NOTE:
Leave the Dial field blank to indicate Answer mode when
connected.
5. Choose OK.