Paradyne BitStorm 4800 Express - Manual (Page 26)

2. Cabling
2-4 July 2004 4821-A2-GN21-10
Management Port
Port 1 can be used to connect the BitStorm 4800 Express to a network
management system using a 10BaseT or 100BaseT LAN. A straight-through cable
can be used regardless of the destination interface, since the port automatically
distinguishes between an MDI and an MDIX.
Procedure
To use Port 1 as the out-of-band management port:
1. Connect an 8-position modular cable to Port 1.
2. If the BitStorm 4800 Express is in a rack, fasten the cable to a rail with a cable
tie.
3. Connect the other end of the cable to your Ethernet switch or a network
interface card in a PC.
04-17529
Ethernet Switch
Port 1
PORT1 10/100BT
CONSOLE
PORT2
10/100BT
ST
ATUS
ALARM TEST
DSL PORTS 1-24
25
47
27 29 31 33 35 37 39 41
43 45 26
48
28 30 32 34 36 38 40 42 44 46
1
23
3 5 7 9 11 13 15 17 19 21 2
24
4 6 8 10 12 14 16 18 20 22