Premier Floors - Manual (Page 11)

11
Panel Basics – assembly
When assembling wall panels, whenever
possible, use a scissor-like motion to place
the panels. To do this, push the bottom
corner so that the skins touch. While holding
the top of the panel out about 24” brace
your foot on the bottom of the panel, then
push the top into place. Be sure to watch
your fingers. If you have difficulty getting
the panels together, use either trucking
straps, bar clamps or dunnage and a sledge
hammer with enough force to bring the panels
together. Jimmy’s Strapjack Panel Puller can
also be used to pull the panels together.