Panasonic DVD-CP72 - Manual (Page 9)

9
RQT6263
Getting started
Basic
operations
POWER / I PROGRESSIVE OUT AUDIO ONLY DISC EXCHANGE DISC SKIP OPEN/ CLOSE
∫ ;
DISC SKIP
3
5 2
≥
4
[1]
≥
1
Basic play
\RAM\ \DVD-A\ \DVD-V\ [VCD\ [CD] [WMA] [MP3]
1
Press [POWER Í ] to turn on the unit.
For progressive output
Press [PROGRESSIVE OUT] so the indicator lights.
2
Press [ < ] to open the drawer.
3
Place the disc(s) on the disc tray(s).
You can load discs on the other trays by
pressing [DISC SKIP] on the main unit.
≥ Remove TYPE 2 and 4 discs from
their cartridges before use.
\RAM\
≥ The label of the disc must face
upward. (With double-sided discs,
load so the label for the side you
want to play is facing up.)
4
Press [ < ] to close the drawer.
The disc indicator will go out when the unit reads a tray as empty.
≥ If a menu screen is shown, see page 10.
≥ [WMA] [MP3]
Group and track names are displayed on the television.
Press [SUBTITLE] to turn the display on or off.
5
Press [ 1 ] (PLAY).
Play begins.
When the disc finishes playing
If Sequential Mode (
➡ page 10) is off, select the disc using the disc
type information screen ( ➡ page 10).
To stop play
Press [
∫ ] ( ➡ page 11, Resume function).
To pause play
Press [
; ].
Press [ 1 ] (PLAY) to restart play.
To prevent damage
Do not;
≥ load more than one disc per tray.
≥ touch the drawer or the carousel while they are in motion
≥ rotate the carousel by hand.
≥ close the drawer by hand.
\Note\
≥ If “ / ” appears on the television
The operation is prohibited by the unit or disc.
≥ Discs continue to rotate while menus are displayed even after playing an
item. Press [
∫ ] when you finish to preserve the unit’s motor and your
television screen.
≥ Volume may be lower when playing DVDs than when playing other discs
or during television broadcasts. Reduce the volume before playing other
sources so that a sudden increase in output does not occur.
≥ Progressive output is not possible if the “Progressive Out” setting is left
as “Disable” in the QUICK SETUP menus.
≥ Although the progressive out indicator lights if you press
[PROGRESSIVE OUT] after changing the “Progressive Out” setting to
“Enable”, output will still only be interlace if you have connected the unit
to your television through the VIDEO OUT or S VIDEO OUT terminals.
≥ When progressive output is on, closed captions will not be displayed.
Quick setup
The QUICK SETUP screen appears when you press [SETUP] the first
time after purchase and assists you to make necessary settings. You can
access this screen again later if you need to (
➡ page 21, Others—QUICK
SETUP).
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
\1\
Press [POWER Í ] to turn on the unit.
\2\
Press [SETUP] to show
the QUICK SETUP
screen.
\3\
Press [ 3 , 4 ] to select the menu language and
press [ENTER].
\4\
Press [ 3 , 4 ] to select “Yes” to continue and
press [ENTER].
\5\
Press [ 3 , 4 ] to select the item and press
[ENTER].
≥ Audio Language ( ➡ page 21)
≥ Subtitle Language ( ➡ page 21)
≥ TV Aspect ( ➡ below)
≥ Progressive Out ( ➡ page 21)
≥ Speaker Setting ( ➡ page 21)
\6\
Press [ENTER] and then [SETUP] to end the
settings.
To return to the previous screen
Press [RETURN].
∫ TV Aspect
Select “4:3” (regular) or “16:9” (widescreen) to suit your television.
If you have a regular 4:3 television, you can also select how video on some
discs is shown (
➡ page 21, Video—TV Aspect).
≥ 4:3 Pan&Scan (Factory preset)
Widescreen software is expanded to fill the
screen of a 4:3 aspect television (unless
prohibited by the producer of the disc).
≥ 4:3 Letterbox
Widescreen software is shown in the letterbox
style on a 4:3 aspect television.
∫ Viewing 4:3 aspect pictures on a 16:9 widescreen
television using progressive output
16:9 aspect pictures are shown correctly, but 4:3 aspect pictures are
stretched horizontally to fill the screen.
≥ If your television can change the aspect when input is progressive
Use the television to change the aspect to the correct one.
≥ If your television cannot change the aspect when input is progressive
Press [PROGRESSIVE OUT] so the indicator goes out. Output will now
be interlace and 4:3 aspect picture is shown in the middle of the screen.
PROGRESSIVE OUT button/indicator
[6] [5]
;
SLEEP
SLOW/SEARCH SKIP
STOP PLAY
MENU TOPMENU
ENTER
DISPLAY
SUBTITLE
DISC DISC1 DISC2 DISC3
AUDIO ANGLE QUICK REPLAY
RETURN
SETUP
1 2 3
OPEN/CLOSE
PLAYLIST DIRECT
NAVIGATOR
PAUSE
POWER
[1]
∫
≥
1 2
≥
4
5
≥
[4] [3]
≥ ≥
[6] [2]
≥
SUBTITLE
RETURN
SELECT
SETUP QUICK SETUP
Select the menu language.
ENTER RETURN
English
Français
Español
1 5
1 5
Play starts from the disc
in the front-left position.
Disc No. in the
play position
Disc type
Unit’s display
AUDIO
DVD
VIDEO
VR CD
WMA
MP3
TRACK CHAP GROUP TITLE
ASS B
PG
DISC
2 1 3 4 5
Disc indicator