Panasonic DMR-XS350 - Manual (Page 16)

16
RQT9439
STEP
1
Inserting the CAM (Conditional Access Module) and Smart Card
You need a Conditional Access Module together with a valid Smart Card and a subscription with the corresponding broadcaster.
1 Insert the certified Smart Card into the commercially available CAM (Conditional Access Module).
2 Insert the CAM into the CI (Common Interface) slot of this unit.
TV service encryption is automatically cancelled and the service can be viewed or recorded.
≥You can insert one or two different CAMs with Smart Cards into this unit.
However, it will not operate properly when two CI Plus compatible CAMs are simultaneously inserted.
∫ PIN query
When you turn the unit on after inserting the card, depending on the card provider, a PIN may be demanded.
Enter the 4-digit code with the numbered buttons.
[Note]
≥Be sure to insert the CAM horizontally into the slot.
≥Do not insert the CAM and Smart Card upside down.
≥For more details, see the manual of the CAM and Smart Card, or consult the dealer.
≥The Common Interface supports the modules according to DVB Specification and CI Plus Specification.
≥Unplug the AC mains lead before you insert or remove the CAM with Smart Card. Remove it slowly.
10BASE-T/ 100BASE-TX
LNB LNB IN 1 IN 1 LNB LNB IN 2 IN 2 OPTICAL COAXIAL
DIGITAL AUDIO OUT (PCM/BITSTREAM)
AC IN
COMPONENT VIDEO OUT OUT AUDIO OUT
VIDEO
L
R
Y
R P
B P
AV1
(TV)
VIDEO RGB/S VIDEO  
AV2 (EXT)
VIDEO RGB/S VIDEO
 
1
2
COMMON INTERFACE
13V/18V 400mA max.
CI (Common Interface) slot
CAM (Conditional Access Module)
Smart Card
This unit’s rear panel
Adjust the position marks.
Label facing upwards
DMRXS350EG-RQT9439-L_eng.book 16 ページ ２０１０年１月１４日 木曜日 午後４時２０分