Panasonic AG-RT850P - Manual (Page 27)

27
All status request command
When the all status request command has been received, the
current deck status is detected and sent by the bitmap shown
below.
PC: [STX] QOS [ETX]
VTR: [STX] OPS
abcdef [ETX]
Automatic send setting command
This sets whether to detect changes in the deck status and
send the status automatically.
PC: [STX] OCS: ∗ [ETX]
VTR: [STX] OCS [ETX]
ab Counter commands cc: Returns fixed value.
Bit 7 6 5 4 3 2 1 0
cd REC
LOCK
ON=1 PAL
PAL
=1 Tracking
(–) (+)
ON=1 Tape speed
00 : 2h
10 : 4h
01 : 6h Repeat
REW
ON=1 Alarm
IN
Usually=0
ef Test mode
00: Normal
10: Line
01: Service
11: Reverse play
Forward
direction=0 Cassette
IN
IN=1
∗ : N=Automatic send ON
F=Automatic send OFF
Automatic send setting request command
This is for verifying the automatic send setting.
PC: [STX] QSC [ETX]
VTR: [STX] OCS
∗ [ETX] ∗ : N=Automatic send ON
F=Automatic send OFF
ACK return status request command
This is for verifying the ACK return status.
PC: [STX] QRA [ETX]
VTR: [STX] RA
∗ [ETX]
∗ : N = ON
F = OFF
Search command
• Forward
PC: [STX] OSF: ∗ [ETX]
VTR: [STX] OSF [ETX]
• Reverse
PC: [STX] OSR: ∗ [ETX]
VTR: [STX] OSR [ETX]
∗ : 0 = still (Play/Pause)
1 = 1/30Ч
2 = 1/10Ч
3, 4 = 1/5Ч
5, 6 = 1.0Ч
7 = 5.0Ч
8-F = 9.0×
Time setting command
This sets the minutes and seconds to zero.
Time setting will change in the following manner:
HH:00:00 – HH:14:59 → HH:00:00
HH:45:00 – HH:59:59 → HH+1:00:00
The time setting command will be disregarded for other
times.
PC: [STX] LTJ [ETX]
VTR: [STX] LTJ [ETX]