Paxar 6030 User Manual
Page 39
Advertising
![background image](/manuals/173525/39/background.png)
Item Pricing Application
________________________________________________________________________
35
To set up the printer to communicate:
♦
the communication parameters must be set.
♦
a communications cable must be connected from your PC to your
printer.
♦
the printer must be in Receive mode.
The following are the correct settings - an asterisk indicates factory-set
defaults.
Parameter
Default
Baud Rate:
9600*
Parity:
Odd*
Data Bits:
7*
Stop Bits:
1*
Flow Control:
Xon/Xoff*
Echo BEL:
(does not matter)
ENQ Polling:
enable
Resp.Timeout:
30*
Advertising