Palm HPK012 - Manual (Page 12)

Pole Track © 2003, Hayton Systems Page 8
19. If your terminal is an SPT1800*, you must perform the following steps
before using Pole Track or GPS Check:
a. At the Application Launcher, tap on the Pull Down Menu icon.
b. On the App menu, tap on Delete
c. On the list of applications, tap on PwrDvr35 (you may have to
scroll down to see it)
d. Tap on the Delete button
e. Tap on the Done button
20. Attach the GPS module to the bottom of the Pole
Track terminal and use the GPS Check application to
initialize the GPS module.
Note: initializing the GPS unit for the first time can take
up to eight minutes.
Call Hayton Systems if you have any questions.
* The model number appears in the battery well. Remove the battery and
quickly note whether the model number says SPT1700-xxxxxx or SPT1800-
xxxxx. The x’s represent several different configuration numbers and are not
important to this task. Do not leave the battery out any longer than necessary or
loss of programs and data will occur.