3 reset to default – Planet Technology Digital Media Center DMA-200 User Manual
Page 72
Advertising
WARNING
Do not power off the system or remove the USB flash while
the upgrade process is running.
3.6.3 Reset to Default
You can restore all configurations to factory default settings by following below
steps:
1. Go to “Set Up Main Menu”, Select “Version”, and choose “Reset to
Default”
2. Make sure you want to do so, then press “OK” button to restore system to
default settings.
WARNING
Restoring Digital Media Center to its default settings will
erase the network set up and media sever configuration.
You will need to set up Digital Media Center again to run on
your network and to access media files.
72
Advertising