Panasonic CU-E18JKK-1 - Manual (Page 7)

7
E18JKK-1, E22JKK-1
7 TO ENJOY QUIET OPERATION
• This operation reduces airfl ow noise.
8
TO REACH TEMPERATURE
QUICKLY
• Single Split System: This operation stops automatically
after 20 minutes.
• Multi Split System: Press the button again or turn OFF the
unit to stop this operation.
9
Press and hold for 5 seconds to dim or restore the
unit’s indicator brightness.
10
Press and hold for approximately 10 seconds to
show temperature setting in °C or °F
11
Press and hold for approximately 5 seconds to show
12-hour (am/pm) or 24-hour time indication.
12
Press to restore the remote control’s default setting.
13
Not used in normal operations.
NOTES NOTES
QUIET
,
POWERFUL
• Can be activated in all modes and can be cancelled by
pressing the respective button again.
QUIET
,
POWERFUL
• Cannot be selected at the same time.
TO SET THE TIMER TO SET THE TIMER
• To turn ON or OFF the unit at a preset time.
ON
OFF
1 2
SET
Select ON or
OFF timer
Set the time Confi rm
• To cancel ON or OFF timer, press
ON
or
OFF
then
press
CANCEL
.
• When ON Timer is set, the unit may start earlier (up
to 35 minutes) before the actual set time in order to
achieve the desired temperature on time.
• Timer operation is based on the clock set in the
remote control and repeats daily once set. For clock
setting, please refer to Remote Control Preparation at
back cover.
• If timer is cancelled manually or due to power failure,
you can restore the previous setting (once power is
resumed) by pressing
SET
.
FAN SPEED
MODE
QUIET
TEMP
OFF/ON
AIR SWING
POWERFUL
TIMER
SET
CANCEL
ON
OFF
1
2
3
SET CHE
CK CLOCK
RESE
AC
RC
6