Configuring the environet, Environet model 2172 – Patton electronic ENVIRONETTM 2100 User Manual
Page 23
Configuring the EnviroNET
23
EnviroNET User Manual
3 • Configuring the EnviroNET
Configuring the EnviroNET
You can configure the EnviroNET via the dip switches on the PC board (except for the 2156 and 2157 mod-
els). The following CopperLink models are available with the EnviroNET Ethernet Extender series:
•
“EnviroNET Model 2172”
on page 23
•
“EnviroNET Model 2168”
on page 27
•
“Other Models”
on page 30
EnviroNET Model 2172
The EnviroNET Model 2172 has eight DIP switches for configuring the EnviroNET for a wide variety of
applications. This section describes switch locations and explains the different configurations.
Figure 9
shows the orientation of the DIP switches in the On and Off positions.
Figure 9. DIP switch orientation
1 2 3 4
ON
Push toggle up
for ON position
Switch toggle
Push toggle
down for
OFF position
1
2
3
4
ON
S1
S1
5 6 7 8
5
6
7
8
S1
S
1 2 3 4
ON
5 6 7 8
POWER ONE
BLP-30
S
1 2 3 4
ON
5 6 7 8