Panasonic KX-FP145 - Manual (Page 54)

8. Programmable Features
52
8.3 Advanced features
Code #22: Setting the journal report to print
automatically
AUTO JOURNAL
MODE=ON [ ±]
“ ON” (default): The unit will print a journal report
automatically after every 30 new fax
communications (page 31).
“
OFF”: The unit will not print a journal report, but
will keep a record of the last 30 fax
communications.
Code #23: Sending documents overseas
OVERSEAS MODE
MODE=ERROR [ ±]
If you cannot send a fax overseas even if the
number is correct and the line is connected,
activate this feature before starting transmission.
This feature improves the reliability by reducing
the transmission speed.
“
ERROR” (default): When the previous fax
transmission fails and you wish to re-send the
document.
“
NEXT FAX”: This setting is effective only for the
next attempted fax transmission. After
transmission, the unit will return to the previous
setting.
“
OFF”: Deactivates this feature.
Note:
L This feature is not available for broadcast
transmission.
L The calling charge may be higher than usual.
Code #25: Sending a fax at a specific time
DELAYED SEND
MODE=OFF [ ±]
This feature allows you to take advantage of low-
cost calling hours offered by your telephone
company. This feature can be set up to 24 hours
in advance of the desired time.
To send a document:
1. Insert the document.
2. If necessary, press {A} or {B} repeatedly to
select the desired resolution (page 30).
3. Press {MENU}.
4. Press {#} then {2}{5}.
5. Press {A} or {B} repeatedly to select “ ON”.
6. Press {SET}.
7. Enter the fax number.
8. Press {SET}.
9. Enter the transmission start time.
L Press {*} repeatedly to select “ AM” or
“ PM”.
10. Press {SET}.
11. Press {MENU}.
Note:
L To cancel after programming, press {STOP}
then {SET}.
Code #26: Setting the Caller ID list to print
automatically
AUTO CALL. LIST
MODE=OFF [ ±]
“ ON”: The unit will print the Caller ID list
automatically after every 30 new calls (page 27).
“
OFF” (default): The unit will not print the Caller
ID list, but keep records of the information for the
last 30 callers.
Code #31: Activating the Distinctive Ring
feature
DISTINCTIVE RING
MODE=OFF [ ±]
See page 38 for details.
Code #32: Setting the ring pattern for fax
(Distinctive Ring feature)
FAX RING PATTERN
RING=B–D [ ±]
See page 39 for details.
Code #34: Setting the quick scan
QUICK SCAN
MODE=OFF [ ±]
This feature is helpful when you want to remove
the document for other uses, because the unit
will release the document before sending or
copying.
“
ON”: The unit will scan the document and store it
into memory first, then the unit will start sending
or copying.
“
OFF” (default): Deactivates this feature.
Note:
L If the document exceeds the memory
capacity, sending of the whole document or
copying of the exceeded document will be
canceled and this feature will be turned OFF
automatically.
Code #36: Receiving oversized documents
RCV REDUCTION
MODE=92% [ ±]
FP145.book Page 52 Thursday, January 15, 2004 10:46 AM