Paxar 9640 - Manual (Page 8)

6
Paxar Monarch 9640 Series
Operators Handbook English
9640 Series
Printer Driver Installation
Drivers are available for Window 3.1, 95, 98 and Windows NT V3.51/ 4.0. Insert printer
driver disk into the floppy disk drive.
For Windows 95/NT4.0...
● Click ‘Start’
● Select ‘Settings’
● Select ‘Printers’
● Double click Add Printer icon
● Click ‘Next’ button
● Specify Network or Local printer (normally Local)
● Click ‘Next’ button
● Click ‘Have Disk’ button
● Enter floppy drive and operating system A:Win95
● Click ‘OK’ button
● Select Printer Label Dr 200 for 9642 or select Printer Label Dr 300 for 9643
● Click ‘Next’ button
● Select communication port. For parallel port this is normally ‘LPT1’: ‘LPT2’: or ‘LPT3:’
● If you are unsure try LPT1:
● For serial port this is normally COM1: or COM2:
■ Parameter Settings:
To change parameter settings:
● Click ‘Start’ ‘Settings’ ‘Printers’
● Double click ‘Label Dr’ icon
● Click ‘Printer’
● Click ‘Properties’
After entering the Properties you can change the following parameters:
■ Details
Printer port, Printer driver
■ Paper
Paper Source (Stock Type), Media Choice (Contrast Setting), More Options -Enable the
optional Cutter or Peeler
■ Device Options
Print Speed (max. 2 or 3 ips dependent upon model)
5
English