Philips HC300 - Manual (Page 5)

English
5
Multiple headphones with one
transmitter
An additional number of headphones
and/or wireless speakers can be used with a
single transmitter if they:
- operate in the 433 MHz band
- can detect a 19 kHz pilot tone.
Please consult the appliance’s electrical
specification sheets for confirmation on
compatibility.
Kit contents
This FM headphone system consists of the
following accessories:
1 x SBC HC332 FM transmitter
1 x SBC HC305 FM headphone
1 x SBC CS030/00 12Volt / 200mA AC/DC
adapter (for UK: SBC CS030/05 12 Volt/
200 mA AC/DC adapter)
2 x non-rechargeable batteries LR03/AAA
(ZnCl)
1 x 3.5 mm plug to 6.3 mm stereo adapter
plug
1 x antenna tube
Transmitter (figure 1)
1 Power indicator – lights up when audio
signals are detected at the audio input.
2 DC power – connect to the 12 Volt/
200 mA AC/DC adapter.
3 3.5 mm stereo headphone audio
input – the audio cable connects your FM
transmitter to an audio source.
4 Channel switch – select one of
2 channels for best reception. We advise
you to select channel 1 as a first option.
5 Controls plate
Headphone (figure 2)
6 Power On/Off – slide the switch to the
on or off position to switch the headphone
on/off.
7 Battery compartment – open the lid,
take out the batteries and replace them
when empty.
8 Volume – adjust volume to your desired
listening level.
9 Tuning – turn the tuning wheel until the
signal is at its clearest.
10 Power indication – lights up when in use.
General information Controls
XP SBC HC 300 12-06-2001 12:56 Pagina 5