Panasonic PT-DW100E - Manual (Page 48)

48 – ENGLISH
Basic operations using the remote control (continued)
Changing the picture
aspect ratio
You can change the aspect ratio for projected
pictures to match the input signal.
Press ASPECT on the remote 1.
control.
The setting will change as follows each time •
ASPECT is pressed.
VID AUTO (PRI.) DEFAULT
S1 AUTO THROUGH
VID AUTO 16:9
HV FIT 4:3
V FIT H FIT
Note
Some aspect ratios may not be available for •
selection depending on the input signal. Refer to
“Adjusting the aspect ratio” for details. (p. 59)