Panasonic PT-DW100E - Manual (Page 74)

74 – ENGLISH
Display Option settings (continued)
Press
◄► to switch “BACK
2.
COLOR”.
The setting will change as follows each time •
◄► is pressed.
BLACK BLUE
LOGO3
LOGO1
LOGO2
BLACK: •
The entire projection area will appear black.
BLUE: •
The entire projection area will appear blue.
LOGO1: •
The picture registered by the user will be projected
in the projection area.
LOGO2: •
The picture registered by the user will be projected
in the projection area.
LOGO3: •
The Panasonic logo is projected.
Note
Separate software is required in order to create the •
pictures to use for “LOGO1” and “LOGO2”. Consult
your dealer.
Setting the startup logo
This sets the startup logo that is projected when the
power is turned on.
Press
▲▼ to select “STARTUP
1.
LOGO”.
ON-SCREEN DISPLAY
BACK COLOR
STARTUP LOGO
BLACK
LOGO3
Press
◄► to switch “STARTUP
2.
LOGO”.
The setting will change as follows each time •
◄► is pressed.
LOGO1
NONE
LOGO2
LOGO3
LOGO3: •
The Panasonic logo and DIGITAL PROJECTOR logo
are projected.
NONE: •
No startup logo is projected.
LOGO1: •
The picture registered by the user will be projected.
LOGO2: •
The picture registered by the user will be projected.
Note
Separate software is required in order to create the •
pictures to use for “LOGO1” and “LOGO2”. Consult
your dealer.