Panasonic PT-DW100E - Manual (Page 91)

ENGLISH – 91
Special Featur
es
Network connections
The projector is equipped with network functions, and web browser controls can be used to carry out the
following operations from a computer.
Projector settings and adjustments •
Projector status display •
Transmission of E-mail messages if there is a problem with the projector •
Note
A LAN cable is required to use the network function. •
PC
Projector
LAN cable (straight) LAN cable (straight)
A Web browser is required to use this function. Make sure that a Web browser is available in the system. •
Use Microsoft Windows 98SE/Me/NT4.0/2000/XP/Vista for the OS of your personal computer. •
The Web browser should be Internet Explorer 6.0 or later or Netscape Communicator 7.0 or later. •
To use the E-mail function, communication with E-mail server must be established. Make sure that E-mail •
feature is available in your system.
Use a straight insulated LAN cable which supports category 5 or above. •
The length of LAN cable must be 100 m or shorter. •
Name and function of network function parts
„
LAN terminal (10BASE-T/100BASE-TX)
Connect LAN cable here.
LAN10/100 lamp (yellow)
This lights when a 100BASE-TX connection
is established.
LAN LINK/ACT lamp (green)
This lights when a LAN cable is connected
and flashes when signals are being received
or sent.
IN OUT RS-232C IN RS-422 IN RS-422 OUT
SERIAL REMOTE 1 REMOTE 2 IN
OUT
IN
SYNC/HD VD
B/P B G/Y R/P R
S-VIDEO IN VIDEO RGB 2 IN DVI-D IN RGB 1 IN
LAN
Attention
If the LAN terminal is touched by electrostatically charged hands (or body), failure may be caused by the •
discharge of static electricity.
Be careful not to touch metallic part of LAN terminal or LAN cable.
Connect indoor equipment to the LAN. •