Philips wearable digital camcorder - Manual (Page 6)

4
Preparation
Attaching your neckstrap
Thread the neck strap through the hole as shown in the picture.
Installation
Please insert the by-packed CD into your CDROM drive and follow
on screen instructions to complete driver and software installation.
Powering your camcorder
Your camcorder has a built-in USB rechargeable battery. To charge,
switch on your computer. Detach the USB cover. Connect your
camcorder DIRECTLY to your computer's USB port. Charge your
camcorder until the
Power level indicator lights up and stops blinking
(approximately 3 hours). Keep your computer switched on during
charging. Disconnect safely after charging completes.
(See page 15 for more information)
IMPORTANT!
WINDOWS 98SE users:
DO NOT CONNECT your camcorder to the computer BEFORE driver installation.
TIP
• You can also use the supplied battery module to provide instant power
to your camcorder. When your camcorder is charged and the battery module
is in use, your camcorder will first use up the power from the external battery.
• You can organize and transfer your files while your camcorder is charging.
(See page 15 for more information)
➯
key19_eng14apr.qxd 28/4/04 14:26 Page 4