Panasonic DP-C213 - Manual (Page 21)

21
Chapter 2 General Settings
5
Enter the password (8-digit), and then
press “OK”.
6
Select “20-39”.
7
Select “21 Dept. Counter Mode”.
The Dept. Counter Mode screen appears.
For the subsequent steps, refer to the relevant
section.
‰ Registering/Changing the Password
(Department Code)
You can register/change the password
(department code) of each department.
Refer to Registering/Changing the
Password (Department Code) (see page
22).
‰ Clearing the Total Counter
You can clear the total departmental counter.
Refer to Clearing the Total Counter (see
page 23).
‰ Printing a Departmental List or Report
You can print a departmental counter list, a
user settings list, or a management settings
list by user.
Refer to Printing a Departmental List or
Report (see page 24).
‰ Changing the Departmental Count
You can change the departmental counter.
Refer to Changing the Departmental
Counter (see page 24).
‰ Changing the Departmental Limit
You can change the departmental limit.
Refer to Changing the Maximum Prints (see
page 26).