ProForm 831.24624.0 - Manual (Page 7)

7
2. Attach two Round Base Pads (57) to the base of
the right Upright (69) with two 1" Tek Screws
(39).
Attach a Wheel (66) to the base of the right
Upright (69) with a Wheel Bolt (64) and a Wheel
Nut (32) as shown.
Do not overtighten the
Wheel Bolt; the Wheel should turn freely.
39
66
32
39
69
57
64
2
4. Attach two Round Base Pads (57) to the base of
the left Upright (69) with two 1" Tek Screws (39).
Attach a Wheel (66) to the base of the left
Upright (69) with a Wheel Bolt (64) and a Wheel
Nut (32) as shown.
Do not overtighten the
Wheel Bolt; the Wheel should turn freely.
With the help of a second person, lower the
Uprights (69) so that the Round Base Pads (57)
are on the floor.
39
57
69
66
32
64
39
4
3. With the help of a second person, carefully tip
the treadmill onto its right side. Do not fully fold
the Frame (86) until the treadmill is com-
pletely assembled.
Insert the other Extension Leg (63) into the base
of the left Upright (69). Hold an Extension Leg
Nut (46) in the bottom of the Extension Leg, and
thread a 2 1/4" Bolt (93) with a 5/16" Star
Washer (101) into the top of the Extension Leg.
Next, thread a 2 3/4" Bolt (100) with a 5/16" Star
Washer (101) into the bottom of the Extension
leg.
Firmly tighten the Bolts.
100
93
101
69
46
63
86
3
57
101
57