Digitizer preferences, To calibrate your handheld screen, Formats preferences – Palm T3 User Manual
Page 330: Country default, To set the country default, Digitizer preferences formats preferences
Chapter 21
Setting Preferences for Your Handheld
316
Digitizer Preferences
You can recalibrate your screen after a hard reset or if your digitizer drifts. You may
need to repeat this process a few times until the calibration registers.
To calibrate your handheld screen:
1.
From the General Preferences list, select Digitizer.
2.
Tap the targets as indicated on the screen as precisely as possible.
Formats Preferences
Use the Formats Preferences screen to set the country default and the display
format of the dates, times, and numbers on your handheld.
Country default
The country default sets date, time, week start day, and number conventions based
on geographic regions where you might use your handheld. For example, in the
United Kingdom, time often is expressed using a 24-hour clock. In the United
States, however, time is expressed using a 12-hour clock with an AM or PM suffix.
To set the country default:
1.
From the General Preferences list, select Formats.
2.
Tap the country name pick list.
3.
Select the setting you want to use.
4.
Tap Done.