Philips SCF294/02 - Manual (Page 6)

Need Help? Call us at 1.800.54.AVENT or visit www.aventamerica.com 10
Parts you will need for this step:
white valve clear silicone diaphragm
To ensure that the pump is
completely stable, insert the
pump base into the stand.
Let-down Massage Cushion ™ white stand
Double pumping? Assemble two pumps as shown below.
Single pumping? Assemble one pump as shown below.
pump body reusable base
9
Before assembling, make sure that you have correctly washed and sanitized the pump.
See section titled ‘Cleaning and Sanitizing ISIS iQ DUO’ on page 6.
1
3
4
2
Click the white valve into the pump body,
so that it fits securely into the small round
hole. Make sure the pointed side of the
valve is facing down.
Fit the clear silicone diaphragm into the
pump body. Ensure a perfect seal around
the rim by pressing down with your fingers.
(This is easier if assembled while the
diaphragm is wet.)
Screw the pump body onto the
reusable base until securely in place.
The Let-down Massage Cushion has petals
that flex in and out to gently massage the
area around the breast. This is intended to
help stimulate a fast, natural milk flow. When
using the breast pump without the Let-down
Massage Cushion, the maximum vacuum
level achievable will be higher.
Assembling Pump Bodies of ISIS iQ DUO ™ Assembling Pump Bodies of ISIS iQ DUO ™