Panasonic DVD-RP82 - Manual (Page 10)

10
RQT6549
Basic operations
[1] [2]
RETURN
3 , 4 , 2 , 1
ENTER
MENU
[4]
6 , 5
∫
: , 9
;
TOP MENU
SUBTITLE
SLEEP SETUP OPEN/CLOSE
SLOW/SEARCH SKIP
STOP PLAY PAUSE
MENU TOP MENU
DIRECT
NAVIGATOR PLAY LIST
ENTER
DISPLAY
SUBTITLE
PROGRAM
RANDOM
REPEAT
A-B REPEAT CANCEL
AUDIO ANGLE
RETURN
0 10
1 2 3
4 5 6
7 8 9
A.SRD
ZOOM
POSITION
MEMORY
CINEMA D.ENH AUDIO ONLY
PAGE GROUP
QUICK
REPLAY
POSITION
MEMORY
POWER
QUICK REPLAY
SLEEP
POWER Í / I MULTI CH AUDIO ONLY RE-MASTER PROGRESSIVE OUT
OPEN/CLOSE QUICK REPLAY
6 , 5 : , 9
[1] [2] [4] [3]
∫ ;
QUICK
REPLAY
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
Preparation
Turn on the television and select the appropriate video input on the
television to suit the connections for the player.
[1]
Press [POWER Í ] to turn on the unit.
For progressive output
Press [PROGRESSIVE OUT] so the indicator lights.
[2]
Press [ < ] to open the disc tray.
[3]
Place the disc on the disc tray.
≥ Remove TYPE 2 and 4 discs from their cartridges before use. [RAM]
≥ Label-up (With double-sided discs, load
so the label for the side you want to play
is facing up.)
[4]
Press [ 1 ] (PLAY).
The disc tray closes and play begins.
[WMA] [MP3]
Group and track names are displayed on the
television. Press [SUBTITLE] to turn the display on or off.
To stop play
Press [
∫ ] ( ➡ page 11, Resume function).
To pause play
Press [
; ].
Press [ 1 ] (PLAY) to restart play.
[Note]
≥ If “ / ” appears on the television
The operation is prohibited by the unit or disc.
≥ Discs continue to rotate while menus are displayed even after playing an
item. Press [
∫ ] when you finish to preserve the unit’s motor and your
television screen.
≥ Volume may be lower when playing DVDs than when playing other discs
or during television broadcasts. Reduce the volume before playing other
sources so that a sudden increase in output does not occur.
≥ Progressive output is not possible if the “Progressive Out” setting is left
as “Disable” in the QUICK SETUP menus.
≥ If the unit is connected to the TV through VIDEO OUT or S VIDEO OUT,
or playing PAL discs, output will be interlace only (even when
“Progressive Out” enabled in the QUICK SETUP menu and the
progressive out indicator lights up when pressed.)
≥ When progressive output is on, closed captions will not be displayed.
Basic play
When a menu screen appears on the television
[DVD-A] [DVD-V] [VCD]
Press the numbered buttons to select an item.
To select a 2-digit number
e.g. 23: [
S 10] ➡ [2] ➡ [3].
≥ When playing DVDs, you can also use [ 3 , 4 , 2 , 1 ] to select items.
Press [ENTER] to confirm your selection.
Play of the selected item now begins.
Other buttons used to operate menus
Read the disc’s instructions for further details about operation.
[
9 ]: Shows the next menu.
[ : ]: Shows the previous menu.
[RETURN]: Shows the menu screen. [VCD]
[TOP MENU]: Shows the first menu screen. [DVD-A] [DVD-V]
[MENU]: Shows the menu screen. [DVD-V]
Skipping items
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
You can skip chapters on DVD-Video, tracks on DVD-Audio, CDs and
Video CDs, and on DVD-RAM you can skip to the start of a program, scene
in a play list, or to a marker.
During play or while paused
Press [ : ] or [ 9 ].
Each press increases the number of skips.
Fast forward and rewind—SEARCH
[RAM] [DVD-A] [DVD-V] [VCD] [CD] [WMA] [MP3]
During play
Press [ 6 ] or [ 5 ].
≥ Turn the shuttle dial [ 6 , 5 ] on the main unit and refer to the on-
screen progress indicator ( ➡ page 20) to check your position. Play starts
again when you release the shuttle dial.
≥ You may erase sound during search ( ➡ page 21, Audio—Audio during
Search).
Slow-motion play
[RAM] [DVD-A] [DVD-V] [VCD]
While paused
Press [ 6 ] or [ 5 ].
Turn the shuttle dial [ 6 , 5 ] on the main unit. The picture stills again
when you release the shuttle dial.
Frame-by-frame viewing
[RAM] [DVD-A] [DVD-V] ] [VCD]
While paused
Press [ 2 ] or [ 1 ].
The frame changes each time you press the button.
≥ The frames change in succession if you press and hold the button.
≥ Pressing [ ; ] also activates forward frame-by-frame.
Notes
≥ The speed of search and slow-motion increases up to 5 steps.
≥ Press [ 1 ] (PLAY) to restart play.
≥ You cannot move backwards with Video CD during slow-motion
and frame-by-frame.
≥ Slow-motion and frame-by-frame only work on the moving picture
parts of DVD-Audio.
≥ When playing Video CDs with playback control
Turning the shuttle dial or pressing buttons to perform skip, search
or slow-motion may take you to a menu screen.
Numbered
buttons
PROGRESSIVE OUT button/indicator