Philips VCA431AT - Manual (Page 21)

2
Press and hold the POWER button on the remote con-
trol until PL appears on the display panel. The VCR will
turn off.
When Child Lock is activated:
● The time will appear on the display panel. PL will appear on the
display panel for two seconds every minute.
● You may insert a tape. However, the VCR power will remain
off and tape playback will not begin.
● You may press the EJECT button to remove the tape (unless a
timer recording is programmed or has finished).
● Timer recordings will take place as scheduled. PL will appear
steadily on the display panel during the timer recording.
● The TV and Cable Box/DBS feature buttons of the remote
control will operate.
Child Lock 21
Child Lock prevents use of the VCR by deactivating the VCR fea-
ture buttons on the VCR and the remote control. To set the
Child Lock, turn on the VCR power, then follow the steps below.
1
Press the VCR button.
1
2-3
3
To cancel the Child Lock, press the VCR button, then
press and hold the POWER button on the remote control
for five seconds so that the VCR turns on.
3