Panasonic SC-HT545 User Manual

Page 29

Advertising
background image

R

Q

T

865

4

29

Usin

g so

und

eff

ect

s

You can enhance low-frequency sound so that heavy bass sound can be
heard clearly, even if the acoustics of your room are not optimal. The unit
automatically selects the most suitable setting according to the type of
playing source.

Press [-H.BASS].

≥ [DVD-V] [DVD-VR]

H.BASS ON (factory preset)

,------.H.BASS OFF

When another source is selected

H.BASS OFF (factory preset)

,------.H.BASS ON

The setting you make is retained, and recalled every time you play from
the same type of source.

This is one of the ways to get appropriate surround effects.
Preparation
Press [DVD].

To adjust speaker level during play

[Effective when playing multi-channel audio or when Dolby Pro
Logic II or Sound Field Control (MOVIE, SPORT or MUSIC) is on.]

1 Press [CH SELECT] to select the speaker.

L

#

C

#

R

#

RS

#

LS

#

SW

^-----------------------------------------------------}
SW: Subwoofer

≥ You can adjust SW only if the disc includes a subwoofer

channel.

≥ “SW” does not appear on the display and is not adjustable

when “

ÎPLII” is lit.

≥ “S” appears on the display when “MOVIE”, “SPORT” or

“MUSIC” is selected with Sound Field Control (

➜ page 28).

In this case, you can adjust both surround speaker levels at the
same time using [

3, 4].

S:

`6 dB to i6 dB

2 Press [

3] (increase) or [4] (decrease) to adjust the speaker

level for each speaker.

C, RS, LS, SW:

`6 dB to i6 dB

(L, R: Only the balance is adjustable.)

≥ To adjust the balance of the front speakers, while “L” or “R” is

selected, press [

2, 1].

[HT545]

Enhancing the bass sound:

H.BASS

ST

H.BASS

SRD

PGM

HDCD

E.

1

W

Adjusting the volume of each
speaker: Speaker level adjustments

1

While stopped and no on-screen display is shown

Press and hold [—TEST] to output a test signal.

≥ To stop the test signal, press and hold [—TEST] again.

L: Front left

C: Center

R: Front right

RS: Right surround

LS: Left surround

≥ There is no output from SW (subwoofer) channel.

2

Press [VOLUME,

r] or [s] to set the volume level

normally used for listening.

3

Press [

3] (increase) or [4] (decrease) to adjust the

speaker level for each speaker.

≥ Adjust the speaker levels to the same level as the front speakers.

C, RS, LS:

`6 dB to i6 dB

HT545 545W En.book Page 29 Wednesday, April 5, 2006 9:41 AM

Advertising