Panasonic KX-TCA391ALN - Manual (Page 3)

– 3 –
Registering Portable Units !
Registration is necessary for portable units. A portable unit will be assigned the
number at registration. The portable unit number is used when paging and
transferring calls. You can register up to 4 portable units at the base unit.
You can not assign the same number to more than one portable unit. To
confirm the portable unit number, place the portable unit on the charger.
1 Base unit:
Press
(FUNCTION/EDIT) until 2 beeps sound.
2 Press (*) .
• The IN USE indicator flashes.
3 Portable unit:
Press
(FUNCTION/EDIT) .
4 Press or repeatedly until the arrow points
to “ Program”, then press OK ( Yes key). H Program
GF H OK=Yes
H Save directory
Ringer volume
GF H OK=Yes
Make sure that the portable unit and base unit are in the standby mode.
Registration must be completed within 1 minute.
5 Press or repeatedly until the arrow
points to “ Unit option”, then press
OK ( Yes key).
6 While “ Assign” is at the arrow, press
OK ( Yes key).
7 Press or repeatedly until the desired
portable unit number (1 to 4) is displayed.
(Ex. “2” is selected.)
• The selected number is displayed.
8 Press OK ( Save key).
• A beep sounds on the base unit and portable unit.
• The IN USE indicator on the base unit goes out.
9 Press (EXIT/CH) to return to the standby mode.
• The portable unit number (1 to 4) will be displayed on
the portable unit.
Set recall time
H Unit option
GF H OK=Yes
H Assign
Erase
GF H OK=Yes
Unit No
:2
GF H OK=Save
–2–
11:34 AM 12/25
SAVE AUTO# ?
11:34 AM 12/25
UNIT ASSIGN