8 installation instructions, Choosing the installation location, Preparation for installation – Panasonic CW-A121VR User Manual

Page 3: Installation procedure

Advertising
background image

8.3.1.

Installation Procedures

• Remove the screws from the rear cabinet.
• Slide the chassis out from the cabinet.

• Place cabinet into the installation hole.

8 Installation Instructions

8.1.

Choosing the Installation Location

• When installing, use the nearest power outlet. Make sure the power outlet is easy to reach so you can quickly disconnect your

air conditioner in case of emergency.

• Ensure that the air conditioner is well supported, securely fastened, easily reachable and not obstructed.
• Avoid locations with: salty or sulphurous air, draughts, dampness and flammable gas.
• If you install the drainage system, be sure to channel the condensed water to a suitable location
• Covers, obstructions and unsteady support may cause excessive operating noise and vibration.
• The rear end of the air conditioner is splash proof. You need not shield or cover it.

8.2.

Preparation for Installation

DIMENSION
• There should not be any obstacles surrounding the unit.
• Prepare an installation hole slightly bigger than the cabinet size.
• Left and right sides of the unit should be at least 15cm away from the wall

8.3.

Installation Procedure

10

CW-A121VR

Advertising