Panasonic DMC-LS1GN - Manual (Page 81)

Playback (advanced)
81
VQT0Q78
Playing Back Pictures on a TV Screen
∫ Playing back pictures with video
cable (supplied)
• Turn the camera and the TV off.
1 Connect the video cable A
(supplied) to the [V.OUT] socket
of the camera.
• Connect the video cable with the [ ]
mark facing the [ 1] mark on the
[V.OUT] socket.
• Hold the plug B to push into or pull out.
2 Connect the video cable to the
video input socket of the TV.
• 1 Yellow: to the video input socket
3 Turn the TV on and select external
input.
4 Turn the camera on and then set
the mode dial to playback mode
[
].
∫ Viewing pictures in other countries
When setting [VIDEO OUT] on the
[SETUP] menu, you can view images on
the TV in other countries (regions) which
use the NTSC or PAL system.
∫ Playback pictures on TV with SD
Memory Card slot
A recorded SD Memory Card can be
played back on TVs with an SD Memory
Card slot.
If you play back pictures recorded using
[HDTV] mode on a High-Definition TV,
(HDTV has 16:9 aspect) the picture quality
will be better.
(MultiMediaCard may not be played back
on TV with SD Memory Card slot.)
• Do not use any other video cables except
the supplied one.
• Only when the mode dial is set to
playback mode [ ], the picture is
displayed on the TV.
• Read the TV operating instructions too.
DIGITAL
V.OUT
DC IN
3V
VQT0Q78ENG.book 81 ページ ２００５年２月１４日 月曜日 午後１時１５分