Getting started – Philips 7FF1CWO User Manual
Page 3
•
Packing list
•
Initial setup
•
Specification
Getting started
Initial setup
Philips digital PhotoFrame™ can be placed either vertically or horizontally to
fit the photos on display. Its internal rechargeable battery provides you the
freedom to pass it around and show photos without the power cord. Or, you
can place it somewhere in the room for constant PhotoFrame™ by connecting
it to the main.
A. Removing the protective bag/film on parts
B. Attaching the PhotoFrame™ stand
•
Place head of stand into socket
•
Rotate clockwise until stand locks in-place
C. Connecting to a power source
•
Connect the supplied power cable from PhotoFrame™ to a power outlet .
The internal battery will start charging and the battery LED turn orange.
Locate control keys
•
Use your PhotoFrame™ by pressing the control keys in the back.