Philips AZ1330 - Manual (Page 11)

Finding a passage within a
track
1 During playback, press and hold down
∞ or §.
➜ The disc is played at high speed and low
volume.
2 When you recognize the passage you want,
release
∞ or §.
➜ Normal playback resumes.
Programming tracks
You may store up to 20 tracks in the desired
sequence. If you like, store any track more
than once.
1 In the stop position, press ∞ or § to select
your desired track number.
• For MP3-CD/WMA: First press
ALBUM/PRESET +/- ( ALBUM/PRE-
SET
3, 4 on the remote control ) once or
more to find your album.
2 Press PROG to store desired track.
➜ Display shows “PRO 2” , indicating pro-
grammed location (See 5).
• If you attempt to program without first
selectig a track, display will show “SELECT
TRACK” briefly, then the total track number
and playing time.
3 Repeat steps 1 to 2 to select and store all
desired tracks.
4 Press 2; to play the program.
➜ “PROG” is dispalyed during program play-
back.
To review your program
In the stop position, press and hold PROG 3
seconds.
➜ The display shows all the stored tracks
(and album numbers for MP3) in
sequence.
Helpful hints:
– Display shows “NO PROG” if no track is
programmed.
– If you try to store more than 20 tracks, no
track can be stored and the display will show
”PROGRAM FULL”.
To erase a program
You can erase a program by:
– pressing 9 (twice during playback or once in
the stop position);
– selecting FM, AM, AUX or DOCK;
– pressing POWER to power off;
– opening the disc door.
➜ “PROGRAM CLEAR” scrolls across the
display once, and “PROG” disappears.
Selecting different play
modes (See
6)
You can select and change the various play
modes before or during playback, and
combine play modes with PROG.
REP – plays the current track continuously.
REP ALL – plays the entire disc/program
continuously.
SHUF – plays all tracks in random order.
REP ALL SHUF – plays all tracks in
random order continuously.
1 To select play modes, press MODE on the
set (REPEAT or SHUFFLE on the remote
contorl) once or more.
2 Press 2; to start playback if in the stop
position.
➜ Shuffle play will start automatically soon
after shuffle mode is selected.
3 To select normal playback, press MODE on
the set (REPEAT or SHUFFLE on the
remote control) repeatedly until the various
play modes are no longer displayed.
– You can also press 9 to cancel your play
modes.
Helpful hints:
– Shuffle (SHUF and REP ALL SHUF) play is
not available in the program mode.
MP3-CD/ CD Player
AVIS
AVISO