Colour system selection, 21 tuning channels, Different region use differing systems) – Panasonic TX-47P500X User Manual
Page 21
21
Tuning Channels
Colour System Selection
(Different region use differing systems)
If a clear picture with correct colours cannot be obtained when a Broadcast or AV signal is received, this function is used.
Press to select the “COLOUR SYS”.
1
2
Press to produce the optimum image.
Colour System Condition.
Note:
PAL, SECAM and NTSC 3.58 are different colour signal broadcast transmission systems applicable to differing countries.
NTSC 4.43 is a trick playback mode used in special VCR to playback NTSC recorded video tapes through PAL
television equipment.
The colour system will change as shown.
This returns the set to the normal viewing condition.
3
Press to exit from the “COLOUR SYS”.
TV/AV
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS
6. 0MHz
COLOUR SYS
AUTO
OFF
JAPAN
POSITION
TUNING MENU
SYS SELECT
CH SELECT
AUTO TUNE
MANUAL TUNE
FINE TUNE
SKIP
SOUND SYS
6. 0MHz
COLOUR SYS
AUTO
OFF
JAPAN
POSITION
TUNING MENU
AUTO
PAL
NTSC3.58
NTSC4.43
SECAM
Press to store the Colour System.
STR