Pelican TH-50VX100U - Manual (Page 36)

36
Specifying the scaler
This menu can be used to specify whether the built-in scaler or an external scaler is used for scaler functions such as
resizing and picture quality adjustment.
The setting is valid with the following input signals.
1125 (1080) / 24p·25p·30p·50p·60p
1 Display the menu screen.
2 Select “SET UP”.
SET UP
POS. /SIZE
SOUND
PICTURE
2 OK
1 select
3 Select “EXTERNAL SCALER MODE” and set.
COMPONENT/RGB-IN SELECT
EXTERNAL SCALER MODE
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OFF
OFF
ON
OFF
OFF
RGB
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (US)
SCREENSAVER
SIGNAL
2
change
1 select
OFF ON
OFF: Use the built-in scaler.
ON: Use an external scaler.
Note:
Selecting “ON” in this setting deactivates the following settings and disables
these operations.
POS. /SIZE menu:
H-SIZE, V-SIZE, 1:1 PIXEL MODE, DISPLAY SIZE
(see page 31, 32)
PICTURE menu: BRIGHTNESS, COLOR, TINT, SHARPNESS,
MEMORY SAVE, MEMORY LOAD (see page 22,
26, 27)
ADVANCED SETTINGS: 3:2 PULLDOWN, NOIZE REDUCTION (see page
24)
SIGNAL menu: XGA MODE (see page 40)
OPTIONS menu: All Aspect (see page 42)
ASPECT Controls (see page 18)
“EXT. SCALER” is displayed in the menu screen to indicate that an external
scaler is in use.
STANDARD
EXT.SCALER
PICTURE MENU
25 PICTURE
NORMAL IZE
BRIGHTNESS
COLOR
TINT
4
Exit the menu.
or
COMPONENT/RGB-IN SELECT
EXTERNAL SCALER MODE
POWER SAVE
STANDBY SAVE
POWER MANAGEMENT
AUTO POWER OFF
OFF
OFF
ON
OFF
OFF
RGB
OSD DESIGN TYPE1
OSD POSITION UPPER LEFT
OSD LANGUAGE ENGLISH (US)
SCREENSAVER
SIGNAL