Lightframe – Philips 190X6 User Manual
Page 44
FAQs (Frequently Asked Questions)
A:
Unlike CRT display technology, in which the speed of the electron beam is swept from
the top to the bottom of the screen determines flicker, an active matrix display uses an
active element (TFT) to control each individual pixel and the refresh rate is therefore not
really applicable to LCD technology.
Q:
Will the LCD screen be resistant to scratches?
A:
A protective coating is applied to the surface of the LCD, which is durable to a certain
extent (approximately up to the hardness of a 2H pencil). In general, it is recommended that
the panel surface is not subject to any excessive shocks or scratches. An optional
protective cover with greater scratch resistance is also available.
Q:
How should I clean the LCD surface?
A:
For normal cleaning, use a clean, soft cloth. For extensive cleaning, please use isopropyl
alcohol. Do not use other solvents such as ethyl alcohol, ethanol, acetone, hexane, etc.
LightFrame
TM
DR
Q:
Can I use previous LightFrame
TM
versions 3, 2 or 1 for my new Philips X6-line Monitor?
A:
Your monitor comes with the newest LightFrame
TM
engine. It is not compatible with
previous software versions.
Q:
Can I use LightFrame
TM
DR software on my LightFrame
TM
version 3, 2 or 1 monitor?
A:
No, LightFrame
TM
1 or 2 or 3 monitors only work with LightFrame
TM
1 or 2 or 3 software.
It is, however, possible to use the LightFrame
TM
2 software on a LightFrame
TM
1 monitor.
Q:
Can I use LightFrame
TM
DR for my CRT LightFrame
TM
monitor?
A:
No. LightFrame
TM
DR is made specifically for digital LCD monitors
file:///D|/My%20Documents/dfu/X6_model/english/190x6/safety/saf_faq.htm (3 of 9)2005-06-27 1:29:18 PM