Setting the speaker setting, Available accessories – Pioneer AVH-P3100DVD User Manual

Page 86

Advertising
background image

! Music Adjust – Adjust the Music mode

# You can operate Music Adjust only when
Music has been selected.

Adjusting the Music mode

You can adjust the Music mode with the fol-
lowing three controls.
! Panorama (Panorama) extends the front

stereo image to include the surround
speakers for an exciting

“wraparound” ef-

fect.

! Dimension (Dimension) allows you to gra-

dually adjust the sound field either towards
the front or the rear.

! Center Width Control (Center Width) al-

lows center-channel sounds to be posi-
tioned between the center speaker and the
left/right speakers. It improves the left-cen-
ter-right stage presentation for both the dri-
ver and the front passenger.

1

Touch Dolby Pro Logic II.

2

Touch Music and then touch

Music Adjust.

# You can operate Music Adjust only when
Music has been selected.

3

Touch a or b to select Panorama (pa-

norama).
Each time you touch a or b selects the item
in the following order:
Panorama (panorama)

—Dimension (dimen-

sion)

—Center Width (center width)

4

Touch d to turn the panorama control

on.

# To turn the panorama control off, touch c.

5

Touch b to select Dimension and then

touch c or d to adjust front/rear speaker
balance.
Each time you touch c or d it moves the
sound towards the front or the rear.
+3 to -3 is displayed as the front/rear speaker
balance moves from front to rear.

6

Touch b to select Center Width and

then touch c or d to adjust the center
image.
Each time you touch c or d it gradually
spreads the center channel sound into the
front left and right speakers over a range

0 to

7.
3 is the default and it

’s recommended for

most recordings.

0 places all center sound in

the center speaker.

7 places all center sound

equally in the left/right speakers.

Setting the speaker setting

You need to make with/without (or yes/no) and
size (bass reproducing capacity) selection/ad-
justments depending on the installed speak-
ers. The size needs to be set to

Large (large) if

the speaker is capable of reproducing sounds
of about 100 Hz or below. Otherwise select
Small (small).
! Low frequency range is not output if the

subwoofer is set to

Off and the front and

rear speakers set to

Small or Off.

! It is imperative that non-installed speakers

be set to

Off.

! Set the front or rear speaker to Large if the

speaker is capable of reproducing bass
content, or if no subwoofer is installed.

1

Touch Speaker Setting.

2

Touch a or b to select the speaker to

be adjusted.
Each time you touch a or b selects the speak-
er in the following order:
Front (front speakers)

—Center (center speak-

er)

—Rear (rear speakers)—Subwoofer (sub-

woofer)

—Phase (subwoofer setting)

# You can switch to Phase only when the sub-
woofer has been set to

On.

3

Touch c or d to select the correct size

for the selected speaker.
Each time you touch c or d selects the size in
the following order:
Off (off)

—Small (small)—Large (large)

Available accessories

En

86

Section

19

Advertising