Sending faxes – Panasonic KX-FP155AL User Manual
Page 35
35
Sending Faxes
Sending the same document to pre-programmed parties
FACE DO
WN
STOP
SET
Note:
●
If you select the “
FINE”, “
SUPER FINE” or
“
PHOTO” resolution, the number of pages
that the unit can transmit will decrease.
●
If the document exceeds the memory
capacity (p. 83), sending will be canceled.
●
If one of the entries is busy or does not
answer, it will be skipped. All skipped entries
will be redialed up to 5 times after all of the
other entries have been called.
1
Insert the document FACE DOWN.
●
If necessary, press
+
or
-
repeatedly to
select the desired resolution (p. 30).
2
Press
)
.
Display:
3
Press
+
or
-
until the following is
displayed.
4
Press
w
.
●
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each entry, calling each
number sequentially.
●
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report.
<BROADCAST>
SEND:PRESS SET
DIRECTORY [+ -]
To cancel the broadcast setting
1.
Press
{
while the unit displays the
following.
Display:
●
The display will show the following.
2.
Press
w
.
SEND CANCELLED?
YES:SET/NO:STOP
@
BROADCASTING
To send to selected parties only once
You can also select the parties for each transmission.
1.
Follow steps 1 and 2 above.
2.
Press
+
or
-
until the following is displayed.
Display:
3.
Press
w
to start programming the entries you
want to transmit.
4.
Press
+
or
-
until the desired entry you want to
transmit is displayed.
Example:
5.
Press
w
.
Example:
●
To program other entries, repeat steps 4 and 5
(up to 20 entries).
6.
Press
w
to start transmission to the programmed
entries.
DIR=Bill
[01]
SEND:PRESS SET
Bill
6543210
DIR=
[00]
NAVI.[+ -]
A
&
A
SET
<ONE
1
TIME
1
BROAD>
PRESS SET