Panasonic EB-G50 - Manual (Page 67)

64
Ph
on
e
Opt
ion
Codes
Change Phonecode..........................................................................................
From Phone Option menu
1
X
Security > Codes A (Select)
2 X Change Phonecode A (Select)
3 Enter New Phonecode A (OK) x2
Enabling/Disabling the PIN..............................................................................
From Phone Option menu
1
X
Security > Codes A (Select)
2 X PIN Control A (Set)
3 Enter PIN number A (OK) x2
Changing the Security Code ...........................................................................
From Phone Option menu
1
X
Security > Codes A (Select)
2 X Change PIN or Change PIN2 A (Select)
3 Enter the current code A (OK)
4 Enter the new code A (OK)
5 Enter the new code to verify A (OK)
NOTE: If the PUK/PUK2 code is entered incorrectly 10 times, the phone will cease to operate permanently. All
information stored in the SIM will be lost and the SIM will need to be replaced. Contact the service provider for more details.
The PIN protects your SIM
against unauthorised use. If
you enable the PIN, every
time the phone is switched on
you will be prompted to enter
the PIN.
The PIN2 controls security for
the Fixed Dial Store, Call
Charge metering and Barred
Dial.
If either PIN/PIN2 is entered
incorrectly 3 times the phone
will be locked and you will
need to enter the PUK/PUK2
code.
Contact the service
provider for the PUK/PUK2
code
.
NOTE: To enter PUK
code for PIN, enter **05#
you will then be prompted
to enter the PUK code,
then follow the on-screen
instructions.
To enter PUK2 code for
PIN2, enter **052# you
will then be prompted to
enter the PUK2 code,
then follow the on-screen
instructions.