Philips SC205 User Manual

Page 8

Advertising
background image

6

O

PERATION

Warming baby bottles

• Turn the click-step control knob (4) to the “ ” (off) position.
• Place the bottle in the container (7) and fill the space between the

bottle and the inner container with water up to two centimetres
from the rim (6). For smaller bottles fill up to just above the milk
line in the bottle.

• Use the click-step control knob to set the temperature. Choose the

setting according to how full the bottle is. The indicator lamp lights
to indicate the heating operation.

After some minutes the milk will have reached just the right
temperature for your baby. The indicator lamp goes out. The indicator
lamp then switches on and off intermittently to indicate the thermostat
is controlling the temperature of the water.
• When the indicator lamp goes out, remove the bottle from the

container and turn the control knob to the “ ” (off) position.

• Shake the bottle a little to distribute the heat evenly before you

allow your baby to drink.

Warning:
– always check that the contents of the bottle are at the correct

temperature by pouring a few drops on the back of your hand.

– do not leave the bottle in the warmer after the indicator lamp has

gone out as this could cause overheating of the milk.

The heating of baby food depends on the amount and consistency of
the food. The three symbols represent the warming of

50-110,

110-180, and

180-250ml milk respectively. The effect of the

initial temperature of the food and water is so small your baby usually
won’t notice it.

Warming baby food jars

• Remove the label and lid from the jar.
• Turn the click-step control knob (4) to the “ ” (off) position.

71

L

AITTEEN

KÄYTTÖÖNOTTO

Käyttö kotona

Varmista ennen kuin liität laitteen pistorasiaan, että verkkojännite on
220-240 V:n vaihtovirta.
• Aseta laite lasten ulottumattomiin ja kuivalle, luistamattomalle ja

vaakasuoralle alustalle.

• Käännä lämpötilan portaittainen säädin (4) asentoon “ ” (pois päältä).
• Ota tarvittava määrä liitosjohtoa kotelostaan (8) ja liitä pistotulppa

pistorasiaan.

Käyttö autossa

• Aseta laite lasten ulottumattomiin ja kuivalle, luistamattomalle ja

vaakasuoralle alustalle.

• Käännä lämpötilan portaittainen säädin (4) asentoon “ ” (pois

päältä).

• Liitä sovitin (9) pistotulppaan (3).
• Ota tarvittava määrä liitosjohtoa kotelostaan (8) ja liitä pistotulppa

sovittimen välityksellä savukkeensytyttimen liitäntään (12 V
tasavirta).

Tärkeitä turvallisuusohjeita

– Lue ja säilytä nämä ohjeet huolellisesti.
– Älä koskaan käytä laitetta ilman vettä.
– Älä koske kuumia pintoja. Käytä kädensijoja tai kahvoja.
– Älä siirrä laitetta, jossa on kuumaa nestettä.
– Älä upota laitetta, liitosjohtoa äläkä liittimiä veteen tai muuhun

nesteeseen.

– Noudata erityistä varovaisuutta käyttäessäsi laitetta lasten läheisyydessä.
– Älä jätä liitosjohtoa roikkumaan pöydän reunalle.
– Älä aseta laitetta kuumille pinnoille äläkä kuumaan uuniin.
– Kokeile ruokaa kädenselkään varmistaaksesi, että lämpötila on sopiva

ennen kuin tarjoat sitä vauvalle.

– Käytä vain astioita, jotka kestävät keittämistä.
– Älä koskaan käytä laitetta auton liikkuessa.
– Käytä vauvaruoanlämmitintä vain +7 …+37 º C:n lämpötilassa.

– Vaihda vauvaruoanlämmittimen vesi usein hygieenisyyssyistä.

ifusc205EURbk.p65

16/05/2001, 11:56

6

Advertising
This manual is related to the following products: