Pioneer AVIC-X9115BT - Manual (Page 156)

Selecting the language
You can set the languages used on the pro-
gram and voice guidance. Each language can
be set separately.
p If you use voice operation, select [English]
in [ Program language:] of
“Language”. If
you select other languages, voice operation
will not be available.
= For details, refer to Basics of Voice Oper-
ation on page 168.
1 Touch [Language] on the
“System Set-
tings
” menu.
= For details, refer to Displaying the “System
Settings ” menu on the previous page.
2 Touch the key next to “Voice lan-
guage:
”.
The language list is displayed.
3 Touch the desired language.
After the language is selected, the screen re-
turns to the previous screen.
p [TTS Setup] is not used normally. This key
will be used in the future when the system
needs a replacement of current TTS files.
4 Touch the key next to
“Program lan-
guage:
”.
5 Touch the desired language.
If you change [ Program language:], a mes-
sage prompting you to reboot appears. Touch
[
OK] to reboot the system.
Changing the splash screen
You can change the splash screen that ap-
pears when the navigation system starts. Copy
your chosen image to the external storage de-
vice (USB, SD), and select the image to im-
port.
p Splash screen images should be used with-
in the following formats;
— BMP or JPEG files
— Allowable horizontal and vertical size
are 2 592 pixels x 1 944 pixels or smaller
— Allowable data size is 15 MB or smaller
p Proper compatibility with allowable files is
not guaranteed.
Customizing preferences
En
156
Chapter
25