Powerware BladeUPS none - Manual (Page 23)

INSTALLATION
EATON Powerware ® BladeUPS ® EBM User's Guide S 164201650 Rev 2 www.powerware.com 19
11. Secure the front of the EBM to the rack using two hex-head screws
in each mounting bracket as shown in Figure 7.
Hex-Head
Screws
Figure 7. Securing the EBM Mounting Brackets
12. Attach the rear hold-down brackets to the rail and slide the brackets
into the slots on the EBM rear panel (see Figure 8).
Rear Hold-Down
Bracket
Figure 8. Securing the Back of the EBM