Philips FWD790 - Manual (Page 2)

AV IN
2
2 1
1
Detailed playback features and additional functions are described in the
accompanying owner’s manual
Make sure your DVD system and TV are connected and turned on!
Plug & Play
1 Turn on the system.
“
AUTO INSTALL - PRESS PLAY” will be displayed.
2 Press PLAY 2; on the system to start installation.
Playing a disc
3 Press DISC1/2/3 on the remote control.
You can also select the DISC (DISC1 0 2 0 3) on the front panel.
4 Turn on the TV and select the correct Video In mode.
You should see the blue Philips DVD background screen on the TV (If no disc in the DVD system).
5 Press OPEN 0 CLOSE 0 on the front of the DVD system and load discs, then press
the corresponding OPEN 0 CLOSE 0 again to close the disc tray.
Make sure the disc label is facing up. For double-sided discs, load the side you want to play face
down.
6 Playback will start automatically.
If a disc menu appears, use
1/¡/5/4 buttons on the remote to make the necessary selection,
then press OK to confirm. Or, use the numeric keypad on the remote to select features. Follow
the instructions given in the disc menu.
7 To stop playback, press STOP 9.
Playing Game
8 Press AUX/GAME to select GAMEPORT mode.
9 Turn on the TV and select the correct Video In mode.
10 Press MIX-IT to mix the game sound to your desired music source.
11 Start playing your favorite game.
Region Codes
DVDs must be labeled for ALL regions or Region 3,
in order to play on this DVD system.
ALL ALL 3
You should find the below accessories in the packaging box.
Audio cables
(white, red)
component video
cables (red, blue,
green)
MW loop
antenna
Composite video cable
(yellow)
AA size
batteries
AC power cable
FM wire antenna