Pioneer AVIC-D1 - Manual (Page 97)

95
Chapter 7
Using the AV Source (Pioneer AV Equipment)
AV
2
Touch “SEND”.
The operation command is transmitted to the
external unit.
Switching the automatic and
manual function
You can turn automatic and manual function on
or off.
You can switch between AUTO and MANUAL
functions of the external unit connected.
Initially, this function is set to AUTO.
❒ Operating commands set for AUTO and
MANUAL operations vary depending on the
external unit connected.
1
Touch “AUTO / MANUAL” in the FUNC-
TION menu.
Touching “AUTO / MANUAL” switches
between “AUTO” and “MANUAL”.
AUX
An IP-BUS-RCA Interconnector such as the
CDRB20/CD-RB10 (sold separately) lets you con-
nect your navigation unit to auxiliary equipment
featuring RCA output. For more details, refer to
the IP-BUS-RCA Interconnector owner’s manual.
Selecting AUX as the source
➲ Switching the source ➞ Page 69
❒ If the auxiliary setting is turned off, “AUX”
cannot be selected.
❒ When “AUX” is set to “ON”, you can select
“AUX” as a source.
➲ Switching the auxiliary setting ➞ Page 100
AV Input (AV)
• For safety reasons, visual images cannot
be viewed while your vehicle is in motion.
To view visual images, you must stop in a
safe place and put on the parking brake
before setting your route (see page 12
Interlock for details).
Selecting AV as the source
➲ Switching the source ➞ Page 69
❒ If you want to switch AV source, select
“VIDEO” in the “AV INPUT”.
➲ Selecting the video input ➞ Page 102
Changing the wide screen mode
➲ How to change the wide screen mode ➞
Page 104
AUX/AV